?id=ocra0.html,0018223: iLO4 remote console malfunction after load kernel 4.18.0-305 from a fresh in..._weixin_39866867的博客-程序员宅基地

技术标签: ?id=ocra0.html  

kernel_log_305.3.1.txt (60,653 bytes)

[ 0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12

[ 0.000000] Linux version 4.18.0-305.3.1.el8.x86_64 ([email protected]) (gcc version 8.4.1 20200928 (Red Hat 8.4.1-1) (GCC)) #1 SMP Tue Jun 1 16:14:33 UTC 2021

[ 0.000000] Command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-4.18.0-305.3.1.el8.x86_64 root=/dev/mapper/cl_nemesi-root ro crashkernel=auto resume=/dev/mapper/cl_nemesi-swap rd.lvm.lv=cl_nemesi/root rd.lvm.lv=cl_nemesi/swap rhgb quiet

[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'

[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'

[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256

[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000098fff] usable

[ 0.000000] BIOS-e820: [mem 0x0000000000099000-0x0000000000099bff] reserved

[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved

[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000f1de3fff] usable

[ 0.000000] BIOS-e820: [mem 0x00000000f1de4000-0x00000000f1dedfff] ACPI data

[ 0.000000] BIOS-e820: [mem 0x00000000f1dee000-0x00000000f7ffffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved

[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000080bffefff] usable

[ 0.000000] NX (Execute Disable) protection: active

[ 0.000000] SMBIOS 2.8 present.

[ 0.000000] DMI: HP ProLiant ML310e Gen8 v2, BIOS P78 04/04/2019

[ 0.000000] tsc: Fast TSC calibration using PIT

[ 0.000000] tsc: Detected 3591.524 MHz processor

[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[ 0.000000] last_pfn = 0x80bfff max_arch_pfn = 0x400000000

[ 0.000000] MTRR default type: write-back

[ 0.000000] MTRR fixed ranges enabled:

[ 0.000000] 00000-9FFFF write-back

[ 0.000000] A0000-BFFFF uncachable

[ 0.000000] C0000-FFFFF write-protect

[ 0.000000] MTRR variable ranges enabled:

[ 0.000000] 0 base 00F4000000 mask 7FFC000000 uncachable

[ 0.000000] 1 base 00F8000000 mask 7FF8000000 uncachable

[ 0.000000] 2 disabled

[ 0.000000] 3 disabled

[ 0.000000] 4 disabled

[ 0.000000] 5 disabled

[ 0.000000] 6 disabled

[ 0.000000] 7 disabled

[ 0.000000] 8 disabled

[ 0.000000] 9 disabled

[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT

[ 0.000000] last_pfn = 0xf1de4 max_arch_pfn = 0x400000000

[ 0.000000] found SMP MP-table at [mem 0x000f4f80-0x000f4f8f]

[ 0.000000] kexec: Reserving the low 1M of memory for crashkernel

[ 0.000000] Using GB pages for direct mapping

[ 0.000000] BRK [0x444c01000, 0x444c01fff] PGTABLE

[ 0.000000] BRK [0x444c02000, 0x444c02fff] PGTABLE

[ 0.000000] BRK [0x444c03000, 0x444c03fff] PGTABLE

[ 0.000000] BRK [0x444c04000, 0x444c04fff] PGTABLE

[ 0.000000] BRK [0x444c05000, 0x444c05fff] PGTABLE

[ 0.000000] BRK [0x444c06000, 0x444c06fff] PGTABLE

[ 0.000000] BRK [0x444c07000, 0x444c07fff] PGTABLE

[ 0.000000] BRK [0x444c08000, 0x444c08fff] PGTABLE

[ 0.000000] RAMDISK: [mem 0x34198000-0x360c3fff]

[ 0.000000] ACPI: Early table checksum verification disabled

[ 0.000000] ACPI: RSDP 0x00000000000F4F00 000024 (v02 HP )

[ 0.000000] ACPI: XSDT 0x00000000F1DE6400 0000B4 (v01 HP ProLiant 00000002 \xd2? 0000162E)

[ 0.000000] ACPI: FACP 0x00000000F1DE6540 0000F4 (v03 HP ProLiant 00000002 \xd2? 0000162E)

[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20200925/tbfadt-569)

[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm2ControlBlock: 8/32 (20200925/tbfadt-569)

[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20200925/tbfadt-674)

[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20200925/tbfadt-674)

[ 0.000000] ACPI: DSDT 0x00000000F1DE6640 00266A (v01 HP DSDT 00000001 INTL 20030228)

[ 0.000000] ACPI: FACS 0x00000000F1DE4140 000040

[ 0.000000] ACPI: FACS 0x00000000F1DE4140 000040

[ 0.000000] ACPI: SPCR 0x00000000F1DE4180 000050 (v01 HP SPCRRBSU 00000001 \xd2? 0000162E)

[ 0.000000] ACPI: MCFG 0x00000000F1DE4200 00003C (v01 HP ProLiant 00000001 00000000)

[ 0.000000] ACPI: HPET 0x00000000F1DE4240 000038 (v01 HP ProLiant 00000002 \xd2? 0000162E)

[ 0.000000] ACPI: FFFF 0x00000000F1DE4280 000064 (v02 HP ProLiant 00000002 \xd2? 0000162E)

[ 0.000000] ACPI: SPMI 0x00000000F1DE4300 000040 (v05 HP ProLiant 00000001 \xd2? 0000162E)

[ 0.000000] ACPI: ERST 0x00000000F1DE4340 000230 (v01 HP ProLiant 00000001 \xd2? 0000162E)

[ 0.000000] ACPI: APIC 0x00000000F1DE4580 000252 (v01 HP ProLiant 00000002 00000000)

[ 0.000000] ACPI: FFFF 0x00000000F1DE4800 000176 (v01 HP ProLiant 00000001 \xd2? 0000162E)

[ 0.000000] ACPI: BERT 0x00000000F1DE4980 000030 (v01 HP ProLiant 00000001 \xd2? 0000162E)

[ 0.000000] ACPI: HEST 0x00000000F1DE49C0 0000BC (v01 HP ProLiant 00000001 \xd2? 0000162E)

[ 0.000000] ACPI: DMAR 0x00000000F1DE4A80 000380 (v01 HP ProLiant 00000001 \xd2? 0000162E)

[ 0.000000] ACPI: FFFF 0x00000000F1DE63C0 00002D (v01 HP ProLiant 00000001 00000000)

[ 0.000000] ACPI: SSDT 0x00000000F1DE8CC0 000137 (v03 HP CRSPCI0 00000002 HP 00000001)

[ 0.000000] ACPI: SSDT 0x00000000F1DE8E00 000573 (v03 HP riser0 00000002 INTL 20030228)

[ 0.000000] ACPI: SSDT 0x00000000F1DE9380 0001E1 (v01 HP pcc 00000001 INTL 20090625)

[ 0.000000] ACPI: SSDT 0x00000000F1DE9580 000377 (v01 HP pmab 00000001 INTL 20090625)

[ 0.000000] ACPI: SSDT 0x00000000F1DE9900 0013A4 (v01 INTEL PPM RCM 80000001 INTL 20061109)

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] No NUMA configuration found

[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000080bffefff]

[ 0.000000] NODE_DATA(0) allocated [mem 0x80bfd5000-0x80bffefff]

[ 0.000000] Using crashkernel=auto, the size chosen is a best effort estimation.

[ 0.000000] Reserving 192MB of memory at 3664MB for crashkernel (System RAM: 32733MB)

[ 0.000000] Zone ranges:

[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]

[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]

[ 0.000000] Normal [mem 0x0000000100000000-0x000000080bffefff]

[ 0.000000] Device empty

[ 0.000000] Movable zone start for each node

[ 0.000000] Early memory node ranges

[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000098fff]

[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000f1de3fff]

[ 0.000000] node 0: [mem 0x0000000100000000-0x000000080bffefff]

[ 0.000000] Zeroed struct page in unavailable ranges: 41605 pages

[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000080bffefff]

[ 0.000000] On node 0 totalpages: 8379771

[ 0.000000] DMA zone: 64 pages used for memmap

[ 0.000000] DMA zone: 152 pages reserved

[ 0.000000] DMA zone: 3992 pages, LIFO batch:0

[ 0.000000] DMA32 zone: 16320 pages used for memmap

[ 0.000000] DMA32 zone: 986596 pages, LIFO batch:63

[ 0.000000] Normal zone: 115456 pages used for memmap

[ 0.000000] Normal zone: 7389183 pages, LIFO batch:63

[ 0.000000] ACPI: PM-Timer IO Port: 0x908

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])

[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[ 0.000000] ACPI: IRQ0 used by override.

[ 0.000000] ACPI: IRQ9 used by override.

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000

[ 0.000000] ACPI: SPCR: SPCR table version 1

[ 0.000000] ACPI: SPCR: Unexpected SPCR Access Width. Defaulting to byte size

[ 0.000000] ACPI: SPCR: console: uart,mmio,0x0,9600

[ 0.000000] smpboot: Allowing 64 CPUs, 56 hotplug CPUs

[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]

[ 0.000000] PM: Registered nosave memory: [mem 0x00099000-0x0009dfff]

[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]

[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]

[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]

[ 0.000000] PM: Registered nosave memory: [mem 0xf1de4000-0xf1dedfff]

[ 0.000000] PM: Registered nosave memory: [mem 0xf1dee000-0xf7ffffff]

[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]

[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfee0ffff]

[ 0.000000] PM: Registered nosave memory: [mem 0xfee10000-0xff7fffff]

[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]

[ 0.000000] [mem 0xf8000000-0xfebfffff] available for PCI devices

[ 0.000000] Booting paravirtualized kernel on bare hardware

[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns

[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:64 nr_cpu_ids:64 nr_node_ids:1

[ 0.000000] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144

[ 0.000000] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152

[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15

[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31

[ 0.000000] pcpu-alloc: [0] 32 33 34 35 36 37 38 39 [0] 40 41 42 43 44 45 46 47

[ 0.000000] pcpu-alloc: [0] 48 49 50 51 52 53 54 55 [0] 56 57 58 59 60 61 62 63

[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8247779

[ 0.000000] Policy zone: Normal

[ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-4.18.0-305.3.1.el8.x86_64 root=/dev/mapper/cl_nemesi-root ro crashkernel=auto resume=/dev/mapper/cl_nemesi-swap rd.lvm.lv=cl_nemesi/root rd.lvm.lv=cl_nemesi/swap rhgb quiet

[ 0.000000] Specific versions of hardware are certified with Red Hat Enterprise Linux 8. Please see the list of hardware certified with Red Hat Enterprise Linux 8 at https://catalog.redhat.com.

[ 0.000000] Memory: 3798752K/33519084K available (12293K kernel code, 2225K rwdata, 7708K rodata, 2480K init, 14048K bss, 880604K reserved, 0K cma-reserved)

[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=1

[ 0.000000] Kernel/User page tables isolation: enabled

[ 0.000000] ftrace: allocating 38570 entries in 151 pages

[ 0.000000] ftrace: allocated 151 pages with 5 groups

[ 0.001000] rcu: Hierarchical RCU implementation.

[ 0.001000] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=64.

[ 0.001000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.

[ 0.001000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=64

[ 0.001000] NR_IRQS: 524544, nr_irqs: 936, preallocated irqs: 16

[ 0.001000] random: crng done (trusting CPU's manufacturer)

[ 0.001000] Console: colour VGA+ 80x25

[ 0.001000] printk: console [tty0] enabled

[ 0.001000] ACPI: Core revision 20200925

[ 0.001000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns

[ 0.001000] hpet clockevent registered

[ 0.001000] APIC: Switch to symmetric I/O mode setup

[ 0.001000] DMAR: Host address width 39

[ 0.001000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1

[ 0.001000] DMAR: dmar0: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da

[ 0.001000] DMAR: RMRR base: 0x000000f1ffd000 end: 0x000000f1ffffff

[ 0.001000] DMAR: RMRR base: 0x000000f1ff6000 end: 0x000000f1ffcfff

[ 0.001000] DMAR: RMRR base: 0x000000f1f93000 end: 0x000000f1f94fff

[ 0.001000] DMAR: RMRR base: 0x000000f1f8f000 end: 0x000000f1f92fff

[ 0.001000] DMAR: RMRR base: 0x000000f1f7f000 end: 0x000000f1f8efff

[ 0.001000] DMAR: RMRR base: 0x000000f1f7e000 end: 0x000000f1f7efff

[ 0.001000] DMAR: RMRR base: 0x000000000f4000 end: 0x000000000f4fff

[ 0.001000] DMAR: RMRR base: 0x000000000e8000 end: 0x000000000e8fff

[ 0.001000] DMAR: [Firmware Bug]: No firmware reserved region can cover this RMRR [0x00000000000e8000-0x00000000000e8fff], contact BIOS vendor for fixes

[ 0.001000] DMAR: [Firmware Bug]: Your BIOS is broken; bad RMRR [0x00000000000e8000-0x00000000000e8fff]

BIOS vendor: HP; Ver: P78; Product Version:

[ 0.001000] DMAR: RMRR base: 0x000000f1dee000 end: 0x000000f1deefff

[ 0.001000] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 0

[ 0.001000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000

[ 0.001000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.

[ 0.001000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.

[ 0.001000] DMAR-IR: Enabled IRQ remapping in xapic mode

[ 0.001000] x2apic: IRQ remapping doesn't support X2APIC mode

[ 0.001000] Switched APIC routing to physical flat.

[ 0.001000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 0.005002] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33c50cd23f0, max_idle_ns: 440795385519 ns

[ 0.005004] Calibrating delay loop (skipped), value calculated using timer frequency.. 7183.04 BogoMIPS (lpj=3591524)

[ 0.005005] pid_max: default: 65536 minimum: 512

[ 0.005054] Security Framework initialized

[ 0.005055] Yama: becoming mindful.

[ 0.005059] SELinux: Initializing.

[ 0.008846] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)

[ 0.010722] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)

[ 0.010794] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)

[ 0.010855] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)

[ 0.011107] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'

[ 0.011108] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)

[ 0.011124] CPU0: Thermal monitoring enabled (TM1)

[ 0.011133] process: using mwait in idle threads

[ 0.011135] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024

[ 0.011136] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4

[ 0.011137] FEATURE SPEC_CTRL Present

[ 0.011137] FEATURE IBPB_SUPPORT Present

[ 0.011138] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization

[ 0.011139] Spectre V2 : Mitigation: Full generic retpoline

[ 0.011139] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch

[ 0.011139] Spectre V2 : Enabling Restricted Speculation for firmware calls

[ 0.011142] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier

[ 0.011142] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl

[ 0.011143] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp

[ 0.011146] SRBDS: Mitigation: Microcode

[ 0.011146] MDS: Mitigation: Clear CPU buffers

[ 0.011335] Freeing SMP alternatives memory: 32K

[ 0.012884] TSC deadline timer enabled

[ 0.012887] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1271 v3 @ 3.60GHz (family: 0x6, model: 0x3c, stepping: 0x3)

[ 0.012984] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Broken BIOS detected, complain to your hardware vendor.

[ 0.013000] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)

[ 0.013000] Intel PMU driver.

[ 0.013000] ... version: 3

[ 0.013000] ... bit width: 48

[ 0.013000] ... generic registers: 4

[ 0.013000] ... value mask: 0000ffffffffffff

[ 0.013000] ... max period: 00007fffffffffff

[ 0.013000] ... fixed-purpose events: 3

[ 0.013000] ... event mask: 000000070000000f

[ 0.013000] rcu: Hierarchical SRCU implementation.

[ 0.015405] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.

[ 0.015421] smp: Bringing up secondary CPUs ...

[ 0.015490] x86: Booting SMP configuration:

[ 0.015491] .... node #0, CPUs: #1 #2 #3 #4

[ 0.020398] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.

[ 0.020398] #5 #6 #7

[ 0.021387] smp: Brought up 1 node, 8 CPUs

[ 0.021387] smpboot: Max logical packages: 8

[ 0.021387] smpboot: Total of 8 processors activated (57464.38 BogoMIPS)

[ 0.072505] node 0 deferred pages initialised in 50ms

[ 0.073409] devtmpfs: initialized

[ 0.073409] x86/mm: Memory block size: 128MB

[ 0.074878] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns

[ 0.074878] futex hash table entries: 16384 (order: 8, 1048576 bytes)

[ 0.075361] pinctrl core: initialized pinctrl subsystem

[ 0.075501] NET: Registered protocol family 16

[ 0.075574] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations

[ 0.075583] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations

[ 0.075591] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations

[ 0.075601] audit: initializing netlink subsys (disabled)

[ 0.075606] audit: type=2000 audit(1622824810.075:1): state=initialized audit_enabled=0 res=1

[ 0.075606] cpuidle: using governor menu

[ 0.075606] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it

[ 0.075606] ACPI: bus type PCI registered

[ 0.075606] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[ 0.075606] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)

[ 0.075606] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820

[ 0.075606] PCI: Using configuration type 1 for base access

[ 0.075606] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on

[ 0.077007] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages

[ 0.077008] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages

[ 0.077037] cryptd: max_cpu_qlen set to 1000

[ 0.077066] ACPI: Added _OSI(Module Device)

[ 0.077067] ACPI: Added _OSI(Processor Device)

[ 0.077067] ACPI: Added _OSI(3.0 _SCP Extensions)

[ 0.077068] ACPI: Added _OSI(Processor Aggregator Device)

[ 0.077069] ACPI: Added _OSI(Linux-Dell-Video)

[ 0.077069] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)

[ 0.077070] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)

[ 0.077785] ACPI: 6 ACPI AML tables successfully acquired and loaded

[ 0.078016] ACPI: Interpreter enabled

[ 0.078023] ACPI: (supports S0 S4 S5)

[ 0.078024] ACPI: Using IOAPIC for interrupt routing

[ 0.078034] HEST: Table parsing has been initialized.

[ 0.078035] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[ 0.080144] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-13])

[ 0.080148] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]

[ 0.080244] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]

[ 0.080244] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]

[ 0.080245] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]

[ 0.080246] acpi PNP0A08:00: _OSC: platform willing to grant []

[ 0.080247] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM

[ 0.080258] acpi PNP0A08:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff window]; [mem 0xfed00000-0xfed44fff window] ignored

[ 0.080323] PCI host bridge to bus 0000:00

[ 0.080325] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff window]

[ 0.080326] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]

[ 0.080326] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]

[ 0.080327] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]

[ 0.080328] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window]

[ 0.080328] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed44fff window]

[ 0.080329] pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb window]

[ 0.080329] pci_bus 0000:00: root bus resource [io 0x03c0-0x03df window]

[ 0.080330] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]

[ 0.080331] pci_bus 0000:00: root bus resource [bus 00-13]

[ 0.080336] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000

[ 0.080387] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400

[ 0.080416] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold

[ 0.080467] pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400

[ 0.080492] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold

[ 0.080554] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330

[ 0.080570] pci 0000:00:14.0: reg 0x10: [mem 0xfacf0000-0xfacfffff 64bit]

[ 0.080617] pci 0000:00:14.0: PME# supported from D3hot D3cold

[ 0.080669] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320

[ 0.080686] pci 0000:00:1a.0: reg 0x10: [mem 0xface0000-0xface03ff]

[ 0.080755] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold

[ 0.080796] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400

[ 0.080858] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[ 0.080913] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400

[ 0.080973] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold

[ 0.081029] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400

[ 0.081089] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold

[ 0.081144] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400

[ 0.081205] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold

[ 0.081257] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400

[ 0.081317] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold

[ 0.081370] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320

[ 0.081388] pci 0000:00:1d.0: reg 0x10: [mem 0xfacd0000-0xfacd03ff]

[ 0.081456] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold

[ 0.081499] pci 0000:00:1f.0: [8086:8c52] type 00 class 0x060100

[ 0.081630] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601

[ 0.081643] pci 0000:00:1f.2: reg 0x10: [io 0x1000-0x1007]

[ 0.081648] pci 0000:00:1f.2: reg 0x14: [io 0x1008-0x100b]

[ 0.081653] pci 0000:00:1f.2: reg 0x18: [io 0x1010-0x1017]

[ 0.081658] pci 0000:00:1f.2: reg 0x1c: [io 0x1018-0x101b]

[ 0.081663] pci 0000:00:1f.2: reg 0x20: [io 0x1020-0x103f]

[ 0.081668] pci 0000:00:1f.2: reg 0x24: [mem 0xfacc0000-0xfacc07ff]

[ 0.081694] pci 0000:00:1f.2: PME# supported from D3hot

[ 0.081854] pci 0000:00:01.0: PCI bridge to [bus 04]

[ 0.081982] pci 0000:07:00.0: [103c:323b] type 00 class 0x010400

[ 0.081994] pci 0000:07:00.0: reg 0x10: [mem 0xfbf00000-0xfbffffff 64bit]

[ 0.081999] pci 0000:07:00.0: reg 0x18: [mem 0xfbef0000-0xfbef03ff 64bit]

[ 0.083004] pci 0000:07:00.0: reg 0x20: [io 0x4000-0x40ff]

[ 0.083012] pci 0000:07:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]

[ 0.083015] pci 0000:07:00.0: enabling Extended Tags

[ 0.083040] pci 0000:07:00.0: PME# supported from D0 D1 D3hot

[ 0.083125] pci 0000:00:01.1: PCI bridge to [bus 07]

[ 0.083126] pci 0000:00:01.1: bridge window [io 0x4000-0x4fff]

[ 0.083128] pci 0000:00:01.1: bridge window [mem 0xfbe00000-0xfbffffff]

[ 0.083263] pci 0000:00:1c.0: PCI bridge to [bus 0a]

[ 0.083292] pci 0000:00:1c.4: PCI bridge to [bus 02]

[ 0.083336] pci 0000:03:00.0: [14e4:165f] type 00 class 0x020000

[ 0.083367] pci 0000:03:00.0: reg 0x10: [mem 0xfabf0000-0xfabfffff 64bit pref]

[ 0.083381] pci 0000:03:00.0: reg 0x18: [mem 0xfabe0000-0xfabeffff 64bit pref]

[ 0.083396] pci 0000:03:00.0: reg 0x20: [mem 0xfabd0000-0xfabdffff 64bit pref]

[ 0.083406] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]

[ 0.083492] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold

[ 0.083534] pci 0000:03:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:1c.5 (capable of 8.000 Gb/s with 5.0 GT/s PCIe x2 link)

[ 0.083569] pci 0000:03:00.1: [14e4:165f] type 00 class 0x020000

[ 0.083599] pci 0000:03:00.1: reg 0x10: [mem 0xfabc0000-0xfabcffff 64bit pref]

[ 0.083614] pci 0000:03:00.1: reg 0x18: [mem 0xfabb0000-0xfabbffff 64bit pref]

[ 0.083628] pci 0000:03:00.1: reg 0x20: [mem 0xfaba0000-0xfabaffff 64bit pref]

[ 0.083638] pci 0000:03:00.1: reg 0x30: [mem 0x00000000-0x0001ffff pref]

[ 0.083723] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold

[ 0.083794] pci 0000:00:1c.5: ASPM: current common clock configuration is inconsistent, reconfiguring

[ 0.086028] pci 0000:00:1c.5: PCI bridge to [bus 03]

[ 0.086035] pci 0000:00:1c.5: bridge window [mem 0xfab00000-0xfabfffff 64bit pref]

[ 0.086177] pci 0000:00:1c.6: PCI bridge to [bus 0d]

[ 0.086228] pci 0000:01:00.0: [103c:3306] type 00 class 0x088000

[ 0.086254] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]

[ 0.086265] pci 0000:01:00.0: reg 0x14: [mem 0xfbdf0000-0xfbdf01ff]

[ 0.086276] pci 0000:01:00.0: reg 0x18: [io 0x3400-0x34ff]

[ 0.086453] pci 0000:01:00.1: [102b:0533] type 00 class 0x030000

[ 0.086478] pci 0000:01:00.1: reg 0x10: [mem 0xf9000000-0xf9ffffff pref]

[ 0.086489] pci 0000:01:00.1: reg 0x14: [mem 0xfbde0000-0xfbde3fff]

[ 0.086500] pci 0000:01:00.1: reg 0x18: [mem 0xfb000000-0xfb7fffff]

[ 0.086657] pci 0000:01:00.2: [103c:3307] type 00 class 0x088000

[ 0.086682] pci 0000:01:00.2: reg 0x10: [io 0x3800-0x38ff]

[ 0.086693] pci 0000:01:00.2: reg 0x14: [mem 0xfaff0000-0xfaff00ff]

[ 0.086704] pci 0000:01:00.2: reg 0x18: [mem 0xfae00000-0xfaefffff]

[ 0.086715] pci 0000:01:00.2: reg 0x1c: [mem 0xfad80000-0xfadfffff]

[ 0.086726] pci 0000:01:00.2: reg 0x20: [mem 0xfad70000-0xfad77fff]

[ 0.086737] pci 0000:01:00.2: reg 0x24: [mem 0xfad60000-0xfad67fff]

[ 0.086749] pci 0000:01:00.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]

[ 0.086808] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold

[ 0.086870] pci 0000:01:00.4: [103c:3300] type 00 class 0x0c0300

[ 0.086937] pci 0000:01:00.4: reg 0x20: [io 0x3c00-0x3c1f]

[ 0.090019] pci 0000:00:1c.7: PCI bridge to [bus 01]

[ 0.090021] pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]

[ 0.090023] pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbdfffff]

[ 0.090026] pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref]

[ 0.090238] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11)

[ 0.090262] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 *10 11)

[ 0.090286] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *7 10 11)

[ 0.090308] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11)

[ 0.090330] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *7 10 11)

[ 0.090352] ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)

[ 0.090373] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled.

[ 0.090395] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled.

[ 0.090520] iommu: Default domain type: Passthrough

[ 0.090520] pci 0000:01:00.1: vgaarb: setting as boot VGA device

[ 0.090520] pci 0000:01:00.1: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none

[ 0.090520] pci 0000:01:00.1: vgaarb: bridge control possible

[ 0.090520] vgaarb: loaded

[ 0.090520] SCSI subsystem initialized

[ 0.090520] ACPI: bus type USB registered

[ 0.090520] usbcore: registered new interface driver usbfs

[ 0.090520] usbcore: registered new interface driver hub

[ 0.090520] usbcore: registered new device driver usb

[ 0.090520] pps_core: LinuxPPS API ver. 1 registered

[ 0.090520] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti

[ 0.090520] PTP clock support registered

[ 0.090520] EDAC MC: Ver: 3.0.0

[ 0.090520] PCI: Using ACPI for IRQ routing

[ 0.091978] PCI: pci_cache_line_size set to 64 bytes

[ 0.092019] e820: reserve RAM buffer [mem 0x00099000-0x0009ffff]

[ 0.092020] e820: reserve RAM buffer [mem 0xf1de4000-0xf3ffffff]

[ 0.092021] e820: reserve RAM buffer [mem 0x80bfff000-0x80bffffff]

[ 0.092097] NetLabel: Initializing

[ 0.092097] NetLabel: domain hash size = 128

[ 0.092097] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO

[ 0.092106] NetLabel: unlabeled traffic allowed by default

[ 0.092108] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0

[ 0.092108] hpet0: 8 comparators, 64-bit 14.318180 MHz counter

[ 0.094018] clocksource: Switched to clocksource tsc-early

[ 0.103145] VFS: Disk quotas dquot_6.6.0

[ 0.103163] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[ 0.103206] pnp: PnP ACPI init

[ 0.103353] system 00:00: [io 0x0408-0x040f] has been reserved

[ 0.103354] system 00:00: [io 0x04d0-0x04d1] has been reserved

[ 0.103355] system 00:00: [io 0x0310-0x0313] has been reserved

[ 0.103356] system 00:00: [io 0x0316-0x0317] has been reserved

[ 0.103357] system 00:00: [io 0x0700-0x071f] has been reserved

[ 0.103357] system 00:00: [io 0x0880-0x08ff] has been reserved

[ 0.103358] system 00:00: [io 0x0900-0x097f] has been reserved

[ 0.103359] system 00:00: [io 0x0cd4-0x0cd7] has been reserved

[ 0.103359] system 00:00: [io 0x0cd0-0x0cd3] has been reserved

[ 0.103360] system 00:00: [io 0x0f50-0x0f58] has been reserved

[ 0.103361] system 00:00: [io 0x0ca0-0x0ca1] has been reserved

[ 0.103362] system 00:00: [io 0x0ca4-0x0ca5] has been reserved

[ 0.103362] system 00:00: [io 0x02f8-0x02ff] has been reserved

[ 0.103364] system 00:00: [mem 0xf4000000-0xf7ffffff] has been reserved

[ 0.103364] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved

[ 0.103365] system 00:00: [mem 0xfed90000-0xfed91fff] could not be reserved

[ 0.103366] system 00:00: [mem 0xfed90000-0xfed91fff] could not be reserved

[ 0.103370] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.103483] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)

[ 0.103493] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)

[ 0.103503] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)

[ 0.103514] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)

[ 0.103580] pnp: PnP ACPI: found 5 devices

[ 0.108836] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[ 0.108860] pci 0000:00:1c.5: BAR 14: assigned [mem 0xf8000000-0xf80fffff]

[ 0.108861] pci 0000:00:01.0: PCI bridge to [bus 04]

[ 0.108866] pci 0000:07:00.0: BAR 6: assigned [mem 0xfbe00000-0xfbe7ffff pref]

[ 0.108867] pci 0000:00:01.1: PCI bridge to [bus 07]

[ 0.108868] pci 0000:00:01.1: bridge window [io 0x4000-0x4fff]

[ 0.108869] pci 0000:00:01.1: bridge window [mem 0xfbe00000-0xfbffffff]

[ 0.108872] pci 0000:00:1c.0: PCI bridge to [bus 0a]

[ 0.108879] pci 0000:00:1c.4: PCI bridge to [bus 02]

[ 0.108887] pci 0000:03:00.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff pref]

[ 0.108888] pci 0000:03:00.1: BAR 6: assigned [mem 0xf8020000-0xf803ffff pref]

[ 0.108888] pci 0000:00:1c.5: PCI bridge to [bus 03]

[ 0.108891] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]

[ 0.108893] pci 0000:00:1c.5: bridge window [mem 0xfab00000-0xfabfffff 64bit pref]

[ 0.108896] pci 0000:00:1c.6: PCI bridge to [bus 0d]

[ 0.108904] pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref]

[ 0.108905] pci 0000:00:1c.7: PCI bridge to [bus 01]

[ 0.108906] pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]

[ 0.108909] pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbdfffff]

[ 0.108911] pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref]

[ 0.108915] pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfbffffff window]

[ 0.108916] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window]

[ 0.108916] pci_bus 0000:00: resource 6 [io 0x0000-0x03af window]

[ 0.108917] pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7 window]

[ 0.108917] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window]

[ 0.108918] pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed44fff window]

[ 0.108919] pci_bus 0000:00: resource 10 [io 0x03b0-0x03bb window]

[ 0.108919] pci_bus 0000:00: resource 11 [io 0x03c0-0x03df window]

[ 0.108920] pci_bus 0000:00: resource 12 [mem 0x000a0000-0x000bffff window]

[ 0.108921] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]

[ 0.108921] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbffffff]

[ 0.108922] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf80fffff]

[ 0.108923] pci_bus 0000:03: resource 2 [mem 0xfab00000-0xfabfffff 64bit pref]

[ 0.108924] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]

[ 0.108924] pci_bus 0000:01: resource 1 [mem 0xfad00000-0xfbdfffff]

[ 0.108925] pci_bus 0000:01: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref]

[ 0.108978] NET: Registered protocol family 2

[ 0.109175] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)

[ 0.109252] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)

[ 0.109469] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[ 0.109567] TCP: Hash tables configured (established 262144 bind 65536)

[ 0.109700] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes)

[ 0.109803] UDP hash table entries: 16384 (order: 7, 524288 bytes)

[ 0.109869] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)

[ 0.110037] NET: Registered protocol family 1

[ 0.110040] NET: Registered protocol family 44

[ 0.123067] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6a0 took 12597 usecs

[ 0.135065] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6a0 took 11705 usecs

[ 0.135084] pci 0000:01:00.1: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

[ 0.135193] PCI: CLS 64 bytes, default 64

[ 0.135219] Unpacking initramfs...

[ 0.431928] Freeing initrd memory: 31920K

[ 0.431966] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[ 0.431968] software IO TLB: mapped [mem 0xe1000000-0xe5000000] (64MB)

[ 0.441185] Initialise system trusted keyrings

[ 0.441191] Key type blacklist registered

[ 0.441210] workingset: timestamp_bits=36 max_order=23 bucket_order=0

[ 0.442373] zbud: loaded

[ 0.442643] pstore: using deflate compression

[ 0.442829] Platform Keyring initialized

[ 0.510781] NET: Registered protocol family 38

[ 0.510783] Key type asymmetric registered

[ 0.510784] Asymmetric key parser 'x509' registered

[ 0.510795] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)

[ 0.510834] io scheduler mq-deadline registered

[ 0.510835] io scheduler kyber registered

[ 0.510869] io scheduler bfq registered

[ 0.510924] atomic64_test: passed for x86-64 platform with CX8 and with SSE

[ 0.511686] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 0.511708] intel_idle: MWAIT substates: 0x42120

[ 0.511709] intel_idle: v0.5.1 model 0x3C

[ 0.511962] intel_idle: Local APIC timer is reliable in all C-states

[ 0.512045] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0

[ 0.512079] ACPI: Power Button [PWRF]

[ 0.512386] thermal LNXTHERM:00: registered as thermal_zone0

[ 0.512386] ACPI: Thermal Zone [THM0] (8 C)

[ 0.512431] ERST: Error Record Serialization Table (ERST) support is initialized.

[ 0.512459] pstore: Registered erst as persistent store backend

[ 0.512493] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.

[ 0.512562] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[ 0.533128] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A

[ 0.553670] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A

[ 0.553874] Non-volatile memory driver v1.3

[ 0.554239] rdac: device handler registered

[ 0.554286] hp_sw: device handler registered

[ 0.554286] emc: device handler registered

[ 0.554353] alua: device handler registered

[ 0.554412] libphy: Fixed MDIO Bus: probed

[ 0.554456] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 0.554458] ehci-pci: EHCI PCI platform driver

[ 0.554527] ehci-pci 0000:00:1a.0: EHCI Host Controller

[ 0.554557] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1

[ 0.554566] ehci-pci 0000:00:1a.0: debug port 2

[ 0.558636] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported

[ 0.558656] ehci-pci 0000:00:1a.0: irq 21, io mem 0xface0000

[ 0.565044] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00

[ 0.565072] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18

[ 0.565073] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 0.565073] usb usb1: Product: EHCI Host Controller

[ 0.565074] usb usb1: Manufacturer: Linux 4.18.0-305.3.1.el8.x86_64 ehci_hcd

[ 0.565075] usb usb1: SerialNumber: 0000:00:1a.0

[ 0.565215] hub 1-0:1.0: USB hub found

[ 0.565219] hub 1-0:1.0: 2 ports detected

[ 0.565345] ehci-pci 0000:00:1d.0: EHCI Host Controller

[ 0.565439] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2

[ 0.565447] ehci-pci 0000:00:1d.0: debug port 2

[ 0.569334] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported

[ 0.569341] ehci-pci 0000:00:1d.0: irq 20, io mem 0xfacd0000

[ 0.576044] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00

[ 0.576075] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18

[ 0.576076] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 0.576076] usb usb2: Product: EHCI Host Controller

[ 0.576077] usb usb2: Manufacturer: Linux 4.18.0-305.3.1.el8.x86_64 ehci_hcd

[ 0.576077] usb usb2: SerialNumber: 0000:00:1d.0

[ 0.576209] hub 2-0:1.0: USB hub found

[ 0.576212] hub 2-0:1.0: 2 ports detected

[ 0.576270] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 0.576273] ohci-pci: OHCI PCI platform driver

[ 0.576279] uhci_hcd: USB Universal Host Controller Interface driver

[ 0.576371] uhci_hcd 0000:01:00.4: UHCI Host Controller

[ 0.576468] uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3

[ 0.576480] uhci_hcd 0000:01:00.4: detected 8 ports

[ 0.576481] uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports

[ 0.576504] uhci_hcd 0000:01:00.4: irq 32, io base 0x00003c00

[ 0.576533] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18

[ 0.576533] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 0.576534] usb usb3: Product: UHCI Host Controller

[ 0.576535] usb usb3: Manufacturer: Linux 4.18.0-305.3.1.el8.x86_64 uhci_hcd

[ 0.576535] usb usb3: SerialNumber: 0000:01:00.4

[ 0.576651] hub 3-0:1.0: USB hub found

[ 0.576654] hub 3-0:1.0: 2 ports detected

[ 0.576762] xhci_hcd 0000:00:14.0: xHCI Host Controller

[ 0.576832] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4

[ 0.577877] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810

[ 0.577880] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported

[ 0.577986] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18

[ 0.577987] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 0.577988] usb usb4: Product: xHCI Host Controller

[ 0.577988] usb usb4: Manufacturer: Linux 4.18.0-305.3.1.el8.x86_64 xhci-hcd

[ 0.577989] usb usb4: SerialNumber: 0000:00:14.0

[ 0.578077] hub 4-0:1.0: USB hub found

[ 0.578085] hub 4-0:1.0: 10 ports detected

[ 0.578380] xhci_hcd 0000:00:14.0: xHCI Host Controller

[ 0.578411] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 5

[ 0.578413] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed

[ 0.578430] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18

[ 0.578430] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 0.578431] usb usb5: Product: xHCI Host Controller

[ 0.578431] usb usb5: Manufacturer: Linux 4.18.0-305.3.1.el8.x86_64 xhci-hcd

[ 0.578432] usb usb5: SerialNumber: 0000:00:14.0

[ 0.578487] hub 5-0:1.0: USB hub found

[ 0.578491] hub 5-0:1.0: 2 ports detected

[ 0.578600] usbcore: registered new interface driver usbserial_generic

[ 0.578604] usbserial: USB Serial support registered for generic

[ 0.578632] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12

[ 0.580434] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 0.580436] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 0.580504] mousedev: PS/2 mouse device common for all mice

[ 0.580579] rtc_cmos 00:02: RTC can wake from S4

[ 0.580735] rtc_cmos 00:02: registered as rtc0

[ 0.580743] rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs

[ 0.580756] intel_pstate: Intel P-state driver initializing

[ 0.581151] hid: raw HID events driver (C) Jiri Kosina

[ 0.581172] usbcore: registered new interface driver usbhid

[ 0.581173] usbhid: USB HID core driver

[ 0.581243] drop_monitor: Initializing network drop monitor service

[ 0.581295] Initializing XFRM netlink socket

[ 0.581377] NET: Registered protocol family 10

[ 0.581793] Segment Routing with IPv6

[ 0.581803] NET: Registered protocol family 17

[ 0.581835] mpls_gso: MPLS GSO support

[ 0.582078] core: Using 9 MCE banks

[ 0.582096] microcode: sig=0x306c3, pf=0x2, revision=0x28

[ 0.582210] microcode: Microcode Update Driver: v2.2.

[ 0.582216] AVX2 version of gcm_enc/dec engaged.

[ 0.582216] AES CTR mode by8 optimization enabled

[ 0.609520] sched_clock: Marking stable (609506107, 0)->(745080879, -135574772)

[ 0.609747] registered taskstats version 1

[ 0.609755] Loading compiled-in X.509 certificates

[ 0.635307] Loaded X.509 cert 'CentOS kernel signing key: e791af5efe51a0987c687fa8cdbff669c9c75f2d'

[ 0.635320] Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'

[ 0.635327] Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'

[ 0.635360] zswap: loaded using pool lzo/zbud

[ 0.635454] page_owner is disabled

[ 0.640559] Key type big_key registered

[ 0.643457] Key type encrypted registered

[ 0.643462] ima: No TPM chip found, activating TPM-bypass!

[ 0.643492] ima: Allocated hash algorithm: sha256

[ 0.643497] ima: No architecture policies found

[ 0.643504] evm: Initialising EVM extended attributes:

[ 0.643504] evm: security.selinux

[ 0.643504] evm: security.ima

[ 0.643505] evm: security.capability

[ 0.643505] evm: HMAC attrs: 0x1

[ 0.643809] rtc_cmos 00:02: setting system clock to 2021-06-04 16:40:10 UTC (1622824810)

[ 0.720278] Freeing unused decrypted memory: 2036K

[ 0.720828] Freeing unused kernel memory: 2480K

[ 0.724060] Write protecting the kernel read-only data: 22528k

[ 0.724873] Freeing unused kernel memory: 2012K

[ 0.725048] Freeing unused kernel memory: 484K

[ 0.746421] systemd[1]: systemd 239 (239-45.el8) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy)

[ 0.746687] systemd[1]: Detected architecture x86-64.

[ 0.746692] systemd[1]: Running in initial RAM disk.

[ 0.757835] systemd[1]: Set hostname to .

[ 0.872722] systemd[1]: Listening on udev Control Socket.

[ 0.872864] systemd[1]: Reached target Timers.

[ 0.875373] systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice.

[ 0.875569] systemd[1]: Listening on udev Kernel Socket.

[ 0.875817] systemd[1]: Listening on Journal Socket (/dev/log).

[ 0.876180] systemd[1]: Listening on Journal Socket.

[ 0.890042] usb 1-1: new high-speed USB device number 2 using ehci-pci

[ 0.898040] usb 2-1: new high-speed USB device number 2 using ehci-pci

[ 0.898074] usb 4-2: new low-speed USB device number 2 using xhci_hcd

[ 0.898118] usb 3-1: new full-speed USB device number 2 using uhci_hcd

[ 0.900327] DMAR: DRHD: handling fault status reg 2

[ 0.900422] DMAR: [INTR-REMAP] Request device [01:00.0] fault index 1c [fault reason 38] Blocked an interrupt request due to source-id verification failure

[ 0.952683] fuse: init (API version 7.31)

[ 1.019370] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04

[ 1.019379] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 1.019832] hub 1-1:1.0: USB hub found

[ 1.019981] hub 1-1:1.0: 4 ports detected

[ 1.028357] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04

[ 1.028364] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 1.028818] hub 2-1:1.0: USB hub found

[ 1.028976] hub 2-1:1.0: 6 ports detected

[ 1.200602] usb 4-2: New USB device found, idVendor=051d, idProduct=0002, bcdDevice= 1.06

[ 1.200603] usb 4-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2

[ 1.200604] usb 4-2: Product: Back-UPS RS 1500 FW:8.g9 .I USB FW:g9

[ 1.200605] usb 4-2: Manufacturer: American Power Conversion

[ 1.200606] usb 4-2: SerialNumber: NB0645003180

[ 1.215582] device-mapper: uevent: version 1.0.3

[ 1.215649] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: [email protected]

[ 1.378076] HP HPSA Driver (v 3.4.20-200-RH1)

[ 1.378087] hpsa 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control

[ 1.378885] hpsa 0000:07:00.0: Logical aborts not supported

[ 1.378886] hpsa 0000:07:00.0: HP SSD Smart Path aborts not supported

[ 1.415035] libata version 3.00 loaded.

[ 1.418418] tg3 0000:03:00.0 eth0: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address 94:57:a5:8f:1b:08

[ 1.418420] tg3 0000:03:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])

[ 1.418421] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]

[ 1.418423] tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]

[ 1.420880] ahci 0000:00:1f.2: version 3.0

[ 1.421198] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled

[ 1.421229] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode

[ 1.421231] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems apst

[ 1.427069] scsi host0: hpsa

[ 1.427301] hpsa can't handle SMP requests

[ 1.430591] tg3 0000:03:00.1 eth1: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address 94:57:a5:8f:1b:09

[ 1.430593] tg3 0000:03:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])

[ 1.430594] tg3 0000:03:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]

[ 1.430595] tg3 0000:03:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]

[ 1.434057] mgag200 0000:01:00.1: vgaarb: deactivate vga console

[ 1.440011] tsc: Refined TSC clocksource calibration: 3591.681 MHz

[ 1.440022] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33c5a0b45fc, max_idle_ns: 440795301468 ns

[ 1.440357] clocksource: Switched to clocksource tsc

[ 1.440742] Console: switching to colour dummy device 80x25

[ 1.441362] hpsa 0000:07:00.0: scsi 0:0:0:0: added RAID HP P420 controller SSDSmartPathCap- En- Exp=1

[ 1.441365] hpsa 0000:07:00.0: scsi 0:0:1:0: masked Direct-Access ATA MB0500GCEHE PHYS DRV SSDSmartPathCap- En- Exp=0

[ 1.441367] hpsa 0000:07:00.0: scsi 0:0:2:0: masked Direct-Access ATA MB0500GCEHE PHYS DRV SSDSmartPathCap- En- Exp=0

[ 1.441369] hpsa 0000:07:00.0: scsi 0:0:3:0: masked Direct-Access ATA MB0500GCEHE PHYS DRV SSDSmartPathCap- En- Exp=0

[ 1.441371] hpsa 0000:07:00.0: scsi 0:0:4:0: masked Direct-Access ATA WDC WD5003AZEX-0 PHYS DRV SSDSmartPathCap- En- Exp=0

[ 1.441374] hpsa 0000:07:00.0: scsi 0:0:5:0: masked Enclosure PMCSIERA SRCv8x6G enclosure SSDSmartPathCap- En- Exp=0

[ 1.441376] hpsa 0000:07:00.0: scsi 0:1:0:0: added Direct-Access HP LOGICAL VOLUME RAID-1(+0) SSDSmartPathCap- En- Exp=1

[ 1.441452] hpsa can't handle SMP requests

[ 1.441619] scsi 0:0:0:0: RAID HP P420 8.32 PQ: 0 ANSI: 5

[ 1.441821] scsi 0:1:0:0: Direct-Access HP LOGICAL VOLUME 8.32 PQ: 0 ANSI: 5

[ 1.447916] [drm] Initialized mgag200 1.0.0 20110418 for 0000:01:00.1 on minor 0

[ 1.450689] fbcon: mgag200drmfb (fb0) is primary device

[ 1.462819] tg3 0000:03:00.0 eno1: renamed from eth0

[ 1.474438] scsi host1: ahci

[ 1.495039] scsi host2: ahci

[ 1.500552] scsi host3: ahci

[ 1.500736] scsi host4: ahci

[ 1.510027] scsi 0:0:0:0: Attached scsi generic sg0 type 12

[ 1.510125] scsi 0:1:0:0: Attached scsi generic sg1 type 0

[ 1.518054] sd 0:1:0:0: [sda] 1953415216 512-byte logical blocks: (1.00 TB/931 GiB)

[ 1.518056] sd 0:1:0:0: [sda] 4096-byte physical blocks

[ 1.518088] sd 0:1:0:0: [sda] Write Protect is off

[ 1.518089] sd 0:1:0:0: [sda] Mode Sense: 73 00 00 08

[ 1.518137] sd 0:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA

[ 1.518138] sd 0:1:0:0: [sda] Optimal transfer size 524288 bytes

[ 1.528038] scsi host5: ahci

[ 1.528223] scsi host6: ahci

[ 1.528268] ata1: SATA max UDMA/133 abar [email protected] port 0xfacc0100 irq 98

[ 1.528269] ata2: SATA max UDMA/133 abar [email protected] port 0xfacc0180 irq 98

[ 1.528271] ata3: SATA max UDMA/133 abar [email protected] port 0xfacc0200 irq 98

[ 1.528272] ata4: SATA max UDMA/133 abar [email protected] port 0xfacc0280 irq 98

[ 1.528273] ata5: SATA max UDMA/133 abar [email protected] port 0xfacc0300 irq 98

[ 1.528275] ata6: SATA max UDMA/133 abar [email protected] port 0xfacc0380 irq 98

[ 1.533692] sda: sda1 sda2

[ 1.533703] tg3 0000:03:00.1 eno2: renamed from eth1

[ 1.534518] sd 0:1:0:0: [sda] Attached SCSI disk

[ 1.575107] Console: switching to colour frame buffer device 128x48

[ 1.601859] mgag200 0000:01:00.1: [drm] fb0: mgag200drmfb frame buffer device

[ 1.744460] hid-generic 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g9 .I USB FW:g9 ] on usb-0000:00:14.0-2/input0

[ 1.837284] ata1: SATA link down (SStatus 0 SControl 300)

[ 1.860006] usb 4-3: new high-speed USB device number 3 using xhci_hcd

[ 1.988100] usb 4-3: New USB device found, idVendor=0424, idProduct=2660, bcdDevice= 8.01

[ 1.988101] usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 1.988595] hub 4-3:1.0: USB hub found

[ 1.988614] hub 4-3:1.0: 2 ports detected

[ 2.141081] ata2: SATA link down (SStatus 0 SControl 300)

[ 2.445077] ata3: SATA link down (SStatus 0 SControl 300)

[ 2.749076] ata4: SATA link down (SStatus 0 SControl 300)

[ 3.053078] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[ 3.055151] ata5.00: ATAPI: hp DVDROM DH61N, IF00, max UDMA/100

[ 3.056850] ata5.00: configured for UDMA/100

[ 3.058237] scsi 5:0:0:0: CD-ROM hp DVDROM DH61N IF00 PQ: 0 ANSI: 5

[ 3.076517] scsi 5:0:0:0: Attached scsi generic sg2 type 5

[ 3.381075] ata6: SATA link down (SStatus 0 SControl 300)

[ 3.419783] sr 5:0:0:0: [sr0] scsi3-mmc drive: 12x/94x cd/rw xa/form2 cdda tray

[ 3.419784] cdrom: Uniform CD-ROM driver Revision: 3.20

[ 3.430755] sr 5:0:0:0: Attached scsi CD-ROM sr0

[ 3.713023] usb 3-1: New USB device found, idVendor=03f0, idProduct=7029, bcdDevice= 0.02

[ 3.713025] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 3.713026] usb 3-1: Product: Virtual Keyboard

[ 3.713027] usb 3-1: Manufacturer: BMC

[ 4.960188] input: BMC Virtual Keyboard as /devices/pci0000:00/0000:00:1c.7/0000:01:00.4/usb3/3-1/3-1:1.0/0003:03F0:7029.0002/input/input4

[ 5.012172] hid-generic 0003:03F0:7029.0002: input,hidraw1: USB HID v1.01 Keyboard [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input0

[ 5.960579] input: BMC Virtual Keyboard as /devices/pci0000:00/0000:00:1c.7/0000:01:00.4/usb3/3-1/3-1:1.1/0003:03F0:7029.0003/input/input5

[ 5.960969] hid-generic 0003:03F0:7029.0003: input,hidraw2: USB HID v1.01 Mouse [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input1

[ 6.578315] PM: Image not found (code -22)

[ 6.844110] SGI XFS with ACLs, security attributes, quota, no debug enabled

[ 6.856168] XFS (dm-0): Mounting V5 Filesystem

[ 6.952966] XFS (dm-0): Ending clean mount

[ 7.838763] printk: systemd: 17 output lines suppressed due to ratelimiting

[ 8.552648] audit: type=1404 audit(1622824818.407:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1

[ 8.834409] SELinux: policy capability network_peer_controls=1

[ 8.834410] SELinux: policy capability open_perms=1

[ 8.834410] SELinux: policy capability extended_socket_class=1

[ 8.834410] SELinux: policy capability always_check_network=0

[ 8.834411] SELinux: policy capability cgroup_seclabel=1

[ 8.834411] SELinux: policy capability nnp_nosuid_transition=1

[ 8.852179] audit: type=1403 audit(1622824818.707:3): auid=4294967295 ses=4294967295 lsm=selinux res=1

[ 8.853839] systemd[1]: Successfully loaded SELinux policy in 309.534ms.

[ 9.338174] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 92.504ms.

[ 9.360225] systemd[1]: systemd 239 (239-45.el8) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy)

[ 9.372213] systemd[1]: Detected architecture x86-64.

[ 9.425388] systemd[1]: Set hostname to .

[ 11.082647] systemd[1]: systemd-journald.service: Succeeded.

[ 11.084874] systemd[1]: initrd-switch-root.service: Succeeded.

[ 11.085796] systemd[1]: Stopped Switch Root.

[ 11.087610] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart.

[ 11.087817] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.

[ 11.088194] systemd[1]: Stopped Journal Service.

[ 11.090632] systemd[1]: Starting Journal Service...

[ 11.298049] Adding 16502780k swap on /dev/mapper/cl_nemesi-swap. Priority:-2 extents:1 across:16502780k FS

[ 12.417031] power_meter ACPI000D:00: Found ACPI power meter.

[ 12.417123] power_meter ACPI000D:00: Ignoring unsafe software power cap!

[ 12.448429] EDAC MC0: Giving out device to module ie31200_edac controller IE31200: DEV 0000:00:00.0 (POLLED)

[ 12.457501] hpwdt 0000:01:00.0: HPE Watchdog Timer Driver: NMI decoding initialized

[ 12.457668] hpwdt 0000:01:00.0: HPE Watchdog Timer Driver: Version: 2.0.4

[ 12.457669] hpwdt 0000:01:00.0: timeout: 30 seconds (nowayout=0)

[ 12.457670] hpwdt 0000:01:00.0: pretimeout: on.

[ 12.457670] hpwdt 0000:01:00.0: kdumptimeout: -1.

[ 12.491534] IPMI message handler: version 39.2

[ 12.508102] ACPI Warning: SystemIO range 0x0000000000000928-0x000000000000092F conflicts with OpRegion 0x0000000000000920-0x000000000000092F (\SGPE) (20200925/utaddress-213)

[ 12.508106] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[ 12.508119] lpc_ich: Resource conflict(s) found affecting gpio_ich

[ 12.522261] ipmi device interface

[ 12.527054] input: PC Speaker as /devices/platform/pcspkr/input/input6

[ 12.563868] ipmi_si: IPMI System Interface driver

[ 12.563887] ipmi_si dmi-ipmi-si.0: probing via SMBIOS

[ 12.563889] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0

[ 12.563890] ipmi_si: Adding SMBIOS-specified kcs state machine

[ 12.563927] ipmi_si IPI0001:00: probing via ACPI

[ 12.563945] ipmi_si IPI0001:00: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0

[ 12.589820] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI

[ 12.589822] ipmi_si: Adding ACPI-specified kcs state machine

[ 12.589874] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0

[ 12.602050] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer

[ 12.602052] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules

[ 12.602052] RAPL PMU: hw unit of domain package 2^-14 Joules

[ 12.602053] RAPL PMU: hw unit of domain dram 2^-14 Joules

[ 12.622694] iTCO_vendor_support: vendor-support=0

[ 12.624064] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11

[ 12.624112] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS

[ 12.645806] gpio_ich: GPIO from 436 to 511 on gpio_ich

[ 12.711015] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.

[ 12.772477] ipmi_si IPI0001:00: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13)

[ 12.880280] ipmi_si IPI0001:00: IPMI kcs interface initialized

[ 12.898647] ipmi_ssif: IPMI SSIF Interface driver

[ 13.245655] intel_rapl_common: Found RAPL domain package

[ 13.245660] intel_rapl_common: Found RAPL domain core

[ 13.245664] intel_rapl_common: Found RAPL domain dram

[ 13.432205] XFS (dm-2): Mounting V5 Filesystem

[ 13.439164] XFS (sda1): Mounting V5 Filesystem

[ 13.566906] XFS (sda1): Ending clean mount

[ 13.646841] XFS (dm-2): Ending clean mount

[ 15.030822] RPC: Registered named UNIX socket transport module.

[ 15.030825] RPC: Registered udp transport module.

[ 15.030827] RPC: Registered tcp transport module.

[ 15.030829] RPC: Registered tcp NFSv4.1 backchannel transport module.

[ 19.442991] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready

[ 19.568081] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready

[ 19.571042] IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready

[ 19.694346] IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready

[ 19.733791] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.

[ 19.735238] IPv6: ADDRCONF(NETDEV_UP): bridge0: link is not ready

[ 19.735318] IPv6: ADDRCONF(NETDEV_UP): bridge0: link is not ready

[ 19.739462] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready

[ 19.740140] IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready

[ 19.740692] IPv6: ADDRCONF(NETDEV_UP): bridge0: link is not ready

[ 20.808605] bridge0: port 1(eno1) entered blocking state

[ 20.808606] bridge0: port 1(eno1) entered disabled state

[ 20.808667] device eno1 entered promiscuous mode

[ 23.121451] tg3 0000:03:00.0 eno1: Link is up at 1000 Mbps, full duplex

[ 23.121455] tg3 0000:03:00.0 eno1: Flow control is on for TX and on for RX

[ 23.121456] tg3 0000:03:00.0 eno1: EEE is disabled

[ 23.121467] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready

[ 23.121536] bridge0: port 1(eno1) entered blocking state

[ 23.121536] bridge0: port 1(eno1) entered forwarding state

[ 27.538996] tun: Universal TUN/TAP device driver, 1.6

[ 27.540094] virbr0: port 1(virbr0-nic) entered blocking state

[ 27.540096] virbr0: port 1(virbr0-nic) entered disabled state

[ 27.540153] device virbr0-nic entered promiscuous mode

[ 27.913592] virbr0: port 1(virbr0-nic) entered blocking state

[ 27.913594] virbr0: port 1(virbr0-nic) entered listening state

[ 27.974009] virbr0: port 1(virbr0-nic) entered disabled state

[ 29.352998] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details.

版权声明:本文为博主原创文章,遵循 CC 4.0 BY-SA 版权协议,转载请附上原文出处链接和本声明。
本文链接:https://blog.csdn.net/weixin_39866867/article/details/118289299

智能推荐

solr5.0mysql_solr windows搭建全记录 – ILSM_景海UI的博客-程序员宅基地

安装1.下载apache-tomcat-7.0.42-windows-x64,solr-4.4.0,jdk-6u10-rc2-bin-b32-windows-i586-p-12_sep_20082.安装jdk-6u10-rc2-bin-b32-windows-i586-p-12_sep_20083.解压apache-tomcat-7.0.42-windows-x64,solr-4.4.0到e:\a...

魅族鸿蒙os测试,EMUI11系统完成推送 鸿蒙OS将在年底进行测试_月落的蜂蜜的博客-程序员宅基地

众所周知,华为的旗舰机有P系列和Mate系列,其中Mate系列比较商务,适合白领、办公人群使用,而P系列主打拍照,适合年轻人使用。作为旗舰机,系统更新肯定不能落下,两者都是每个月更新一次小版本,一年更新一次大版本,系统更新也是为了优化拍照水平、丰富功能、修复BUG以及添加安卓补丁。一般来说,旗舰机有三个大安卓版本的更新,之后就会被放弃,都是小修小补。今年的大版本为EMUI11系统,根据不同机型不同...

推荐书单1.0:测试工程师成长之路_weixin_34162695的博客-程序员宅基地

晚上到家后看完了《文明之光》最后一个章节的内容,然后对着书架发呆,想了半天,突然冒出一个念头:何不整理一个推荐书单?想到就做!这里就将自己看过的一些觉得不错的书整理个目录,方便自己及其他人查阅,做个参考。。。。17年最后的几天,我整理好了自己18年的阅读计划和购书书单,也希望看到这篇博客的各位有自己的学习计划。。。 关于软件测试的思维和方法论《Google软件测试之道》《敏...

取消CheckBox的点击阴影效果_夏夜班星的博客-程序员宅基地_checkbox去掉点击效果

android:background="@android:color/transparent"CheckBox属性添加android:background为透明后,可取消点击的阴影效果。

python含义是什么_python _=是什么意思_weixin_39773158的博客-程序员宅基地

广告关闭腾讯云11.11云上盛惠 ,精选热门产品助力上云,云服务器首年88元起,买的越多返的越多,最高返5000元!在while loops里我们常常会碰到的 += 意思很简单,大致上大家都说了再加以解释吧! >>> num = 1 当 num 小过5 或等于 5 它会一直不断的输出,直到 num 大过才会停止输出im mtcy 在这个时候我们注意到在下方有一行代码. num +...

社交化分享SDK for Unity_weixin_33769207的博客-程序员宅基地

前言社交化分享,即分享到社交网络。本文主要记录的是在Unity集成社交化分享SDK,现主流的分享SDK有如下:1、友盟社交化分享 for unity2、ShareSDK分享 for unity分享SDK for Unity下面看一下使用SDK进行分享的效果友盟 SDK分享Share SDK分享如何分享大图片QQ分享-大图片比如,...

随便推点

Ajax和Ajax Jquery_潮有信的博客-程序员宅基地

Ajax定义:异步的javascript和XML,是一种综合技术,运用XMLHttpRequest(xhr)和服务器交换数据,通过javascript局部渲染页面,从而实现页面异步的局部更新同步与异步: 简单来说同步代码按顺序执行,会阻塞代码执行(alert)。异步不会阻塞代码。一、XMLHttpRequest(XHR)1、创建xml 对象var xhr = new XMLHTTPRequest()2、 打开HTTP连接xhr.open(method,url,布尔值)////打开的方法

react引入html2canvas和jspdf生成PDF打印及下载_拷贝程序猿的博客-程序员宅基地_react 打印pdf

项目场景:项目场景:系统新增打印发货单功能开工开工两种方式引入依赖包npm install html2canvas jspdf --saveyarn add html2canvas jspdf --save直接上代码:提示:项目引入组件较多,自行理解代码即可。注意opacity: 0 处为点睛之笔。防止拷贝的dom覆盖当前样式故隐藏,display:none是不行的,pdf会白纸的哦!import React, { createRef, LegacyRef } from 'reac

参数化查询 但未提供该参数(将null插入数据库)_Young丶的博客-程序员宅基地_参数化查询需要参数但未提供该参数

当你是使用参数化查询时为参数赋值时,比如command.Parameters.Add("@a",SqlDbType.Text,30).Value=a;当a=null是将报错:错参数化查询 '(@a varchar(100)....' 需要参数 '@a',但未提供该参数只是因为你给a的值为null,而数据库中的null(空)是System.DBNull 类型的不是同一类。所以在插

charles 请求出现乱码_Charles中windows版本解决response乱码问题_今忱的博客-程序员宅基地

在charles.ini中,手动增加一个vmarg.6=-Dfile.encoding=UTF-8即可working.directory=.classpath.1=lib/charles.jarmain.class=com.xk72.charles.gui.MainWithClassLoadervm.version.min=1.8vm.location=jre\bin\server\jvm.dll...

爬虫能用到,将爬到的字典转为dataframe格式_了因和尚的博客-程序员宅基地

import pandas as pd #导入pandas包data = pd.read_csv("2.csv") #读取csv文件#print (data.head(5))#print(data.columns)#print(data.shape)order = ['time', 'match', 'home', ...

售价1.7万!华为5G折叠手机发布,到底值不值得买?_weixin_33851429的博客-程序员宅基地

曾经爱理不理,现在高攀不起!2月24日,华为推出首款5G折叠手机!网友们沸腾了!大胆的折叠机身设计,搭载5G技术的高端配置,以及让人感叹的昂贵售价!我们一起来看看吧!机身配置配置上看,华为Mate X搭载了8英寸的柔性可折叠OLED显示屏,麒麟980处理器,内置两块电池,容量为4500mAh,支持快充,30分钟可充电85%。卖点之一:折叠这可难坏了买手机壳的哟~折叠是Mate X...

推荐文章

热门文章

相关标签